Exhaust Fan

Model: BDCR-TH

Air Volume: 2 – 21000 cfm

Maximum SP: 3.5″ wg. @ standard air density

• A wide variety of motors are available to meet specific application needs.
• Heavy duty construction, durable and weather resistant.
• Non-overloading backward inclined wheels, blades and inlets fabricated from 3003-H14 aluminum.
• High efficiency combined with low tip speeds result in quiet operation.
• Standard emergency disconnect switch.

Model: DR-HTH

Air Volume: 2 – 18000 cfm

Maximum SP: 3.25″ wg. @ standard air density

Centrifugal Direct Drive Exhaust Fan is designed to pull more air under higher static pressures. The efficient, balanced wheel and air inlet design contribute to maintaining low noise levels and extended motor life. This exhaust fan is especially suited for installation in hospitals, schools, motels and hotels, auditoriums, office buildings and light industrial areas.

• Spun aluminum housing for rust-free, weather resistant durability.
• All sizes can be wall mounted.
• Standard emergency disconnect switch.

Model: BDU-TH

Air Volume: 2 – 20000 cfm

Maximum SP: 2.75″ wg. @ standard air density

• High efficiency and low tip speeds provide quiet operation.
• Emergency disconnect switch comes standard on all units.

Model: BDU-HPTH

Air Volume: 600 – 17000 cfm

Maximum SP: 5″ wg. @ standard air density

• HP fans used for high pressure applications.
• High efficiency and low tip speeds provide quiet operation.
• Emergency disconnect switch comes standard on all units.

Model: DU-HTH

Air Volume: 2 – 16500 cfm

Maximum SP: 2.75″ wg. @ standard air density

• Variable speed control standard on all sizes. Allows up to a 50% reduction in speed.
• All sizes can be wall mounted.
• Emergency disconnect switch comes standard on all units.

Model: SIBD-TH

Air Volume: 200 – 27500 cfm

Maximum SP: 3.5″ wg. @ standard air density

Model: SIDD-TH

Air Volume: 125 – 2924 cfm

Maximum SP: 2.25″ wg. @ standard air density

Model: TKB-Inline

Air Volume: 1 – 21000 cfm

Maximum SP: 7″ wg. @ standard air density

Model: T-RE

Air Volume: 150 – 10000 cfm

Maximum SP: 6″ wg. @ standard air density

• Curb Mounted Exhaust Blower.
• Tilt Out Wheel and Automatic Safety Lock with Manual Release.
• Interlocked Disconnect Switch.

Model: TUSBI-RM

Air Volume: 250 – 32000 cfm

Maximum SP: 6″ wg. @ standard air density

• Use with General Ventilation (UL705) and for Restaurant Duty (UL762).
• Vented Motor Cover and Continuously Sealed Housing for added weather protection.
• Scroll and Motor Compartment Connected for added Structure.
• Easily Accessible Clean Out Door and Motor Access from 3 Sides.
• Standard 2″ Grease Drain.
• Standard Emergency Disconnect Switch.
• Standard Heat Slinger and Heavy Duty Pillow Block Bearings for Belt Drive option.
• Standard Shaft Seal for Belt Drive option.
• Standard Pivot Plates for easy Belt Adjustment.
• Double Groove Pulleys standard for 2 HP and Above Motors.
• Discharge Outlet Flanges Available on All Sizes.
• Temperature Ratings – Aluminum Wheel, 350 degrees F.

Model: WPC-TA

Air Volume: 3500 – 27719 cfm

Maximum SP: 0.38″ wg. @ standard air density

Model: WPK-TA

Air Volume: 2400 – 50000 cfm

Maximum SP: 0.75″ wg. @ standard air density

Model: WPH-TA

Air Volume: 16000 – 41759 cfm

Maximum SP: 0.25″ wg. @ standard air density